Elevator Factory Considered Various Accidents for the Elevator from fujielevators's blog

Overloaded elevators can also severely limit your movement. The elevator car is a small box. If the overcrowded elevator opens on the fire floor. The Elevator Factory installed many safety devices for the elevator. For elevator accidents, we need to prepare in advance.

This will also tell you if the elevator is working properly. If the car does not stop, a malfunction may occur; try to stop using the call cancel button immediately. In the worst case, if the car enters the fire barrier, remember that the door will not open unless you press the door open button. Close the door, press the "Call Cancel" button, and then select the fire under another floor.

Do not overload the elevator. It is vital that the elevator is in normal operation and will not be trapped in the hoistway. The capacity of most standard passenger elevators varies with the square feet of the elevator car floor. The bigger the floor, the heavier the lift can lift. The natural trend is to try to get the engine and truck companies to get into the elevator first. Unfortunately, an elevator overload can cause the elevator to stop. This is especially true for old elevators that are not properly repaired and maintained.

In order to keep the elevator running correctly, please check and correct:

Response time

When walking between floors

practice

Door operation

Start and stop

Hall and call lights and floor lamps


Previous post     
     Next post
     Blog home

The Wall

No comments
You need to sign in to comment

Post

By fujielevators
Added Oct 11

Tags

Rate

Your rate:
Total: (0 rates)

Archives